Home Generator Installation in Foley, AL

One of the better gas footprints in south Baldwin

Foley is Riviera Utilities’ home base, and Riviera’s gas department serves a long list of south Baldwin communities directly. If you are in town, natural gas is a realistic option rather than a maybe, and that removes the propane tank from the quote: no tank to buy or lease, no placement question, nothing to refill before a storm. Call with your address and confirm, because "serves the city" and "there is a main on your street" are different claims.

A fast-growing town means new-build lots

South Baldwin has been adding subdivisions quickly, and new construction is the easy case for a generator: a clear side yard, a modern panel and a gas stub already near the house. If you are in a newer Foley neighborhood, tell the installer the age of the panel and whether gas is already at the house, because both move the price.

Inland, but not out of the weather

Foley sits back from the beach, which helps with salt and surge but does not buy much on wind or on the long regional outages that follow a storm crossing this part of the coast. The useful question is not how close you are to the water, it is how long your street has gone without power in the past few years. Size for that.

Fuel: what Foley actually has

Riviera Utilities’ gas department serves Foley directly, along with Magnolia Springs, Summerdale, Elberta, Silverhill, Loxley and Gulf Shores. That is a wide footprint for south Baldwin, so a natural gas unit is realistic for a lot of addresses here. Still confirm there is a main on your street.

The natural gas provider we could verify here is Riviera Utilities (opens in new tab). Confirm service at your address before you budget for a natural gas unit.

Permits and code: verify locally

A standby generator install normally needs electrical and gas permits and an inspection, and a licensed installer usually pulls them as part of the job. Requirements, fees and clearances are local and they change, so we don’t publish numbers for them. Verify with the City of Foley, or Baldwin County building inspection outside the city Baldwin County, building inspection (opens in new tab), and get the clearances from the manufacturer’s install manual plus the local code official — not from a website.

What it costs around here

Installed cost is driven by the house, not the ZIP code: the size you need, whether gas is already at the property, how far the unit sits from the supply, and whether the electrical panel needs work. Published figures for a 22 kW air-cooled unit, installed:

• $8,000–$16,000 average installed cost of a 22 kW air-cooled standby unit sourceSource: Generac, home standby installed cost (opens in new tab)
• $11,000–$15,000 typical installed cost reported in Oct 2026 sourceSource: The Watt Guide, typical installed cost (Oct 2026) (opens in new tab)
• $8,800–$20,700 the wider range of reported installed prices sourceSource: wholehousegeneratorcost.com, reported installed range (opens in new tab)

Run the cost estimator to see which of those adders apply to your situation, or read the full Gulf Coast cost guide.